{"title":"Fuel Pumps","description":"","products":[{"product_id":"walbro-450lph-high-pressure-e85-fuel-pump","title":"Walbro Intank Fuel Pump 450LPH High Pressure - Universal","description":"\u003ch1\u003eWalbro\/TI Automotive Intank Fuel Pump 450LPH High Pressure - Universal\u003c\/h1\u003e\n\u003cp\u003eThe innovative design of the DCSS 39\/50 features a single impeller with two parallel rows of turbine blades. \u003cbr\u003eDesigned for E85 or Gasoline applications for high performance engines exceeding 750hp. It outperforms all current market in-tank fuel pumps.\u003c\/p\u003e\n\u003cp\u003eThe fuel pump has a dual channel turbine design for maximum efficiency under high pressure and high temperature applications. The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge.\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003eThis innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps.\u003c\/p\u003e\n\u003cp\u003eAll pumping components have been validated to OEM specifications for approved use in E85\/flex fuel applications.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOutperforms all current market in-tank fuel pumps\u003c\/li\u003e\n\u003cli\u003eDesigned for engines with more than 750 HP\u003c\/li\u003e\n\u003cli\u003eAward-winning OE technology\u003c\/li\u003e\n\u003cli\u003eHigh-pressure, high-flow performance\u003c\/li\u003e\n\u003cli\u003eOEM technology designed and developed for E85\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: The F90000267 requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed.  Installation kit required\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003cstrong\u003e\u003cbr\u003e\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e465 lph @ 40 psi and 13.5V (14.1 amps) in gasoline \u003cbr\u003eOutlet diameter: 10mm (3\/8\") \u003cbr\u003e\u003cbr\u003eDiameter (upper body) 39mm \u003cbr\u003eDiameter (lower body) 50mm\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":27047329726564,"sku":"F90000267","price":145.34,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/walbro_tia485_fuel_pump_back.jpg?v=1557265395"},{"product_id":"walbro-inline-fuel-pump-255lph-high-pressure-universal-external","title":"Walbro Inline Fuel Pump 255LPH High Pressure - Universal","description":"\u003ch1\u003eWalbro\/TI Automotive\u003cspan\u003e \u003c\/span\u003eInline\u003cspan\u003e \u003c\/span\u003eFuel Pump\u003cspan\u003e \u003c\/span\u003e255LPH High Pressure - Universal\u003c\/h1\u003e\n\u003cp\u003eWalbro universal fuel pump GSL392 is one of the most popular fuel pumps made by Walbro. It is an ideal upgrade for racing or performance purposes where higher pressure fuel is necessary.\u003c\/p\u003e\n\u003cp\u003eFor example, at 80 PSI the standard 255 lph pump will flow around 132 liters (35 gallons) per hour. At that same 80 PSI the equivalent HP (high pressure) fuel pump will flow over 210 liters (50 gallons) per hour.\u003c\/p\u003e\n\u003cp\u003eWalbro GSL392 255LPH High Pressure Inline Fuel Pump are extremely popular upgrades to vehicles with engine and performance modifications, supporting up to 650 horse power.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes installation and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePressure: 255 (LPH) Liters Per Hour\u003c\/li\u003e\n\u003cli\u003eAMP: 20 - OE-proven second generation.\u003c\/li\u003e\n\u003cli\u003eFits most EFI applications including turbo and supercharged.\u003c\/li\u003e\n\u003cli\u003eVariety of pressures and flows available, including high pressure performance.\u003c\/li\u003e\n\u003cli\u003eAll metal shell including inlet and outlet.\u003c\/li\u003e\n\u003cli\u003e10mm x 1mm threaded inlet and outlet accept a variety of fittings.\u003c\/li\u003e\n\u003cli\u003eLightweight, compact design.\u003c\/li\u003e\n\u003cli\u003eQS9000 certified. - Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote!\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003eThis pump should never be operated without a fuel filter between the tank and the pump. This pre-filter should be 20- to 40-microns. Additionally, almost all applications require a 10-micron post-filter between the fuel pump and the fuel rail. Putting just a 10-micron filter before the pump is not recommended. We offer a good quality metal cannister filter (disposable) with 3\/8-inch hose barb ends as well as the outstanding Holley aluminum billet 390 LPH filter with -6 and -8 AN fittings. The Holley filter can be disassembled and cleaned or the entire filter media renewed.\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":29055878758478,"sku":"GSL392","price":114.44,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/vpn-gsl392_rf_xl.jpg?v=1647552042"},{"product_id":"walbro-inline-fuel-pump-190lph-standard-pressure-universal-external","title":"Walbro Inline Fuel Pump 190LPH Standard Pressure - Universal","description":"\u003ch1\u003eWalbro\/TI Automotive Inline Fuel Pump 190LPH Standard Pressure - Universal\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're upping the boost or stroking your block - more fuel is a MUST! Walbro Fuel Pumps are the industry standard for high performance fuel pumps regardless of make or model.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eThis kit includes installation and mounting hardware.\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOE-proven second generation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFits most EFI applications including turbo and supercharged.\u003c\/li\u003e\n\u003cli\u003eVariety of pressures and flows available, including high pressure performance.\u003c\/li\u003e\n\u003cli\u003eAll metal shell including inlet and outlet.\u003c\/li\u003e\n\u003cli\u003e10mm x 1mm threaded inlet and outlet accept a variety of fittings.\u003c\/li\u003e\n\u003cli\u003eLightweight, compact design.\u003c\/li\u003e\n\u003cli\u003eQS9000 certified. - Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote!\u003c\/b\u003e\u003cspan\u003e This pump should never be operated without a fuel filter between the tank and the pump. This pre-filter should be 20- to 40-microns. Additionally, almost all applications require a 10-micron post-filter between the fuel pump and the fuel rail. Putting just a 10-micron filter before the pump is not recommended. We offer a good quality metal cannister filter (disposable) with 3\/8-inch hose barb ends as well as the outstanding Holley aluminum billet 390 LPH filter with -6 and -8 AN fittings. The Holley filter can be disassembled and cleaned or the entire filter media renewed.\u003c\/span\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":29055882690638,"sku":"GSL391","price":124.94,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/walbro-gsl-inline-pump-kit_5.jpg?v=1647551988"},{"product_id":"walbro-inline-fuel-pump-190lph-high-pressure-universal-external","title":"Walbro Inline Fuel Pump 190LPH High Pressure - Universal","description":"\u003ch1\u003e\u003cspan\u003eWalbro\/TI Automotive Inline Fuel Pump 190LPH High Pressure - Universal\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're upping the boost or stroking your block - more fuel is a MUST! Walbro Fuel Pumps are the industry standard for high performance fuel pumps regardless of make or model.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes installation and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOE-proven second generation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFits most EFI applications including turbo and supercharged.\u003c\/li\u003e\n\u003cli\u003eVariety of pressures and flows available, including high pressure performance.\u003c\/li\u003e\n\u003cli\u003eAll metal shell including inlet and outlet.\u003c\/li\u003e\n\u003cli\u003e10mm x 1mm threaded inlet and outlet accept a variety of fittings.\u003c\/li\u003e\n\u003cli\u003eLightweight, compact design.\u003c\/li\u003e\n\u003cli\u003eQS9000 certified. - Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote!\u003c\/b\u003e\u003cspan\u003e This pump should never be operated without a fuel filter between the tank and the pump. This pre-filter should be 20- to 40-microns. Additionally, almost all applications require a 10-micron post-filter between the fuel pump and the fuel rail. Putting just a 10-micron filter before the pump is not recommended. We offer a good quality metal cannister filter (disposable) with 3\/8-inch hose barb ends as well as the outstanding Holley aluminum billet 390 LPH filter with -6 and -8 AN fittings. The Holley filter can be disassembled and cleaned or the entire filter media renewed.\u003c\/span\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":29055893373006,"sku":"GSL394","price":124.96,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/81YG44ZorML._AC_SX355.jpg?v=1647551968"},{"product_id":"walbro-inline-fuel-pump-130lph-low-pressure-universal-external","title":"Walbro Inline Fuel Pump 130LPH Low Pressure - Universal","description":"\u003ch1\u003eWalbro\/TI Automotive Inline Fuel Pump 130LPH Low Pressure - Universal\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're upping the boost or stroking your block - more fuel is a MUST! Walbro Fuel Pumps are the industry standard for high performance fuel pumps regardless of make or model.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes installation and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOE-proven second generation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFits most EFI applications including turbo and supercharged.\u003c\/li\u003e\n\u003cli\u003eVariety of pressures and flows available, including high pressure performance.\u003c\/li\u003e\n\u003cli\u003eAll metal shell including inlet and outlet.\u003c\/li\u003e\n\u003cli\u003e10mm x 1mm threaded inlet and outlet accept a variety of fittings.\u003c\/li\u003e\n\u003cli\u003eLightweight, compact design.\u003c\/li\u003e\n\u003cli\u003eQS9000 certified. - Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote!\u003c\/b\u003e\u003cspan\u003e This pump should never be operated without a fuel filter between the tank and the pump. This pre-filter should be 20- to 40-microns. Additionally, almost all applications require a 10-micron post-filter between the fuel pump and the fuel rail. Putting just a 10-micron filter before the pump is not recommended. We offer a good quality metal cannister filter (disposable) with 3\/8-inch hose barb ends as well as the outstanding Holley aluminum billet 390 LPH filter with -6 and -8 AN fittings. The Holley filter can be disassembled and cleaned or the entire filter media renewed.\u003c\/span\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":29055917555790,"sku":"GSL395","price":126.46,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/wal-gsl391_gw_530x_2x_c250dc09-b06a-4690-b18c-165c17605db1.jpg?v=1647551941"},{"product_id":"walbro-inline-fuel-pump-155lph-universal-external","title":"Walbro Inline Fuel Pump 155LPH - Universal","description":"\u003ch1\u003eWalbro\/TI Automotive Inline Fuel Pump 155LPH - Universal\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003eWhether you're upping the boost or stroking your block - more fuel is a MUST! Walbro Fuel Pumps are the industry standard for high performance fuel pumps regardless of make or model.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis kit includes installation and mounting hardware.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eOE-proven second generation\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eFits most EFI applications including turbo and supercharged.\u003c\/li\u003e\n\u003cli\u003eVariety of pressures and flows available, including high pressure performance.\u003c\/li\u003e\n\u003cli\u003eAll metal shell including inlet and outlet.\u003c\/li\u003e\n\u003cli\u003e10mm x 1mm threaded inlet and outlet accept a variety of fittings.\u003c\/li\u003e\n\u003cli\u003eLightweight, compact design.\u003c\/li\u003e\n\u003cli\u003eQS9000 certified. - Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eNote!\u003c\/b\u003e\u003cspan\u003e This pump should never be operated without a fuel filter between the tank and the pump. This pre-filter should be 20- to 40-microns. Additionally, almost all applications require a 10-micron post-filter between the fuel pump and the fuel rail. Putting just a 10-micron filter before the pump is not recommended. We offer a good quality metal cannister filter (disposable) with 3\/8-inch hose barb ends as well as the outstanding Holley aluminum billet 390 LPH filter with -6 and -8 AN fittings. The Holley filter can be disassembled and cleaned or the entire filter media renewed.\u003c\/span\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":29055918309454,"sku":"GSL393","price":124.96,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/walbro155.png?v=1560278261"},{"product_id":"walbro-intank-fuel-pump-255lph-high-pressure-universal","title":"Walbro Intank Fuel Pump 255LPH High Pressure - Universal","description":"\u003ch1\u003eWalbro\/TI Automotive Intank Fuel Pump 255LPH High Pressure - Universal\u003c\/h1\u003e\n\u003cp\u003eThe Walbro high output in-tank electric fuel pumps are available in flow ratings of 255 liters of fuel per hour. These particular pumps flow significantly more fuel at higher pressure than standard-pressure versions. For example, at 80 PSI the standard 255 lph pump will flow around 132 liters (35 gallons) per hour. At that same 80 PSI the equivalent HP (high pressure) fuel pump will flow over 210 liters (50 gallons) per hour.\u003c\/p\u003e\n\u003cp\u003eWalbro in-tank electric fuel pumps utilize a proven gerotor design. The outside dimensions, however, are compact enough to fit existing hanger assemblies, without modification. Coverage includes most popular Acura and Honda, and many other Import applications.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eHorsepower: 500HP+\u003c\/li\u003e\n\u003cli\u003eFlow Rate: 255LPH \u003c\/li\u003e\n\u003cli\u003eLightweight, compact design.\u003c\/li\u003e\n\u003cli\u003eQS9000 certified. - Made in USA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eGSS340 : 22mm center inlet\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eGSS341 : 11mm inlet, 180 degrees from the outlet\u003c\/span\u003e\u003cbr\u003e\u003cspan style=\"font-size: 1.4em;\"\u003eGSS342 : 11mm inlet, in line with the outlet\u003c\/span\u003e\u003cbr\u003e","brand":"Walbro","offers":[{"title":"GSS340","offer_id":29056013729870,"sku":"GSS340","price":88.34,"currency_code":"USD","in_stock":true},{"title":"GSS341","offer_id":39455353569395,"sku":"GSS341","price":88.57,"currency_code":"USD","in_stock":true},{"title":"GSS342","offer_id":39455353602163,"sku":"GSS342","price":88.33,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/350cb74_GSS340-1.png?v=1560280640"},{"product_id":"walbro-hellcat-525lph-high-pressure-e85-fuel-pump","title":"Walbro Hellcat Fuel Pump 525LPH High Pressure E85 Fuel Pump","description":"\u003ch1\u003eWalbro\/TI Automotive Hellcat Fuel Pump 525LPH High Pressure E85 Fuel Pump\u003c\/h1\u003e\n\u003cp\u003e\u003cstrong\u003eCaution:\u003c\/strong\u003e\u003cem\u003e \u003cspan style=\"font-size: 15px;\"\u003eExtremely\u003c\/span\u003e High \u003cspan style=\"font-size: 15px;\"\u003eCounterfeit\u003c\/span\u003e Rate - Buy from an Authorized Dealer Only\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe F90000285 Hellcat 525LPH Fuel Pump is the highest output in-tank fuel pump on the market.\u003c\/p\u003e\n\u003cp\u003eEnjoy the highest output on today’s market with our new DCSS 39\/50 fuel pump. Able to support an aggressive 700+ horsepower, with a super charger, this innovative dual pumping channel design delivers maximum pressure with superior fuel flow. Operating in both gas and E85, this fuel pump comes with a check valve to avoid system leak-down and extended cranking at start-up. This superior design results in improved hot fuel flow, as well as minimal noise, increasing efficiency by 20% over conventional pumps, delivering unparalelled performance\u003c\/p\u003e\n\u003cp\u003eThe innovative design of the DCSS 39\/50 features a single impeller with two parallel rows of turbine blades. Designed for high performance engines exceeding 500hp.\u003cspan\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003e• Highest flow in-tank brushed fuel pump offering from TI Automotive\u003cbr\u003e• Featuring award winning DCSS technology\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e• E85 compatible\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e• Internal check valve — prevent fuel system pressure bleed down — prevent extended cranks\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e• High pressure relief setting — support supercharger and turbo applications\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e• Capable of supporting 900+HP at 60PSI naturally aspirated applications\u003cspan\u003e \u003c\/span\u003e\u003cbr\u003e• Flush mountable to existing hanger with installation kit 400-1168\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cp\u003eFuel: GAS \u0026amp; E85\u003cbr\u003eHorsepower: 900+ at 60PSI, naturally aspirated applications\u003cbr\u003eOver All Pump Length: 131mm\u003cbr\u003eMain Housing Diameter: 39mm\u003cbr\u003eLower Housing Diameter: 50mm\u003cbr\u003eFuel Inlet Diameter: 11mm OD\u003cbr\u003eFuel Outlet Diameter: 11mm OD\u003cbr\u003eFlow Rate: 470lph @ 40psi (120+ gph)\u003cbr\u003eTest Voltage: 13.5 Volts\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":29056099876942,"sku":"F90000285","price":174.71,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/hellcat525.png?v=1560283037"},{"product_id":"walbro-ti-400-1168-install-kit","title":"Walbro TI E-85 400-1168 Install Kit","description":"\u003ch1\u003eWalbro\/TI Automotive TI E-85 400-1168 Install Kit\u003c\/h1\u003e\n\u003cp\u003eThe installation kit for the E85 fuel pump (fuel strainer, fuel hose, harness pigtail, 2 clamps, 2 wire connectors).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: 400-0085 has been discontinuted and replaced by 400-1168 install kit.\u003c\/em\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":29056414089294,"sku":"400-1168","price":56.87,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/installkite85.png?v=1560289401"},{"product_id":"aem-380lph-high-pressure-fuel-pump-6an-female-out-10an-female-in","title":"AEM 400LPH AN Fittings Inline High Flow Fuel Pump","description":"\u003ch1\u003eAEM \u003cspan data-mce-fragment=\"1\"\u003e400LPH AN Fittings Inline High Flow Fuel Pump\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePN: 50-1005\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA high-flow, high-pressure pump in the popular \"044-style\" envelope\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAEM's 400LPH AN Fittings High Flow, High-Pressure Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It can be installed externally or in-tank using optional hardware that is sold separately (see Images tab and part numbers, below). It utilizes the industry standard “044 Style” envelope and -10 AN female inlet and -6 AN female outlet connections for easy installation on new applications and for quick replacement of existing competitor fuel pumps. The 50-1005 fuel pump delivers incredible performance and value.\u003c\/p\u003e\n\u003cp\u003eAEM’s 400LPH High Flow, High-Pressure Fuel Pump is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost!* It flows 400LPH (100 gph) at 40 PSI, 340LPH (90 gph) at 73 PSI, and 270LPH (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available in the Specs tab.\u003c\/p\u003e\n\u003cp\u003eThe AEM 400LPH AN Fittings High Flow Fuel Pump is rated for use with ethanol-blended fuels, (E85\/E90) and all types of gasoline, but pump life will be diminished if used with 100% ethanol fuels. The inlet thread is a -10 AN female ORB (O-ring port fitting) and the discharge is a female -6 AN ORB (O-ring port fitting).\u003c\/p\u003e\n\u003cp\u003eA male -6 to -8 AN discharge fitting with integral high-pressure check valve, terminal nuts, terminal boots and installation instructions are included. Optional accessories that are sold separately include a -10 ORB fitting inlet pre-filter (for use with in-tank installations), and both -8 and -6 discharge adapters without integral check valves. Accessory fittings are hard anodized.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003ePopular “044 Style” physical configuration but with AN inlet \u0026amp; discharge port connections\u003c\/li\u003e\n\u003cli\u003eMaintains very high flow even at boosted fuel pressures; 340LPH @ 73 PSI (30 psi boost)\u003c\/li\u003e\n\u003cli\u003eInstalls externally or in-tank\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested to flow minimum of 400LPH (100gph) @ 40 PSI\u003c\/li\u003e\n\u003cli\u003eCompatible with Flex Fuel (E85\/E90) and all types of gasoline (100% Alcohol fuels may diminish fuel pump life)\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, -6 to -8 male AN discharge fitting with check valve, terminal nuts \u0026amp; boots, instructions\u003c\/li\u003e\n\u003cli\u003eOptional -10 ORB fitting pre-filter, -6 and -8 discharge adapters without the integral check valves\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":31626374807667,"sku":"aem50-1005","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/50-1005-kit-web.jpg?v=1588712384"},{"product_id":"aem-340lph-in-tank-fuel-pump-kit","title":"AEM 340LPH High Flow In-Tank Fuel Pump Offset Inlet","description":"\u003ch1\u003eAEM \u003cspan data-mce-fragment=\"1\"\u003e340LPH High Flow In-Tank Fuel Pump Offset Inlet\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePN: 50-1000\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAffordable, Reliable Performance \u0026amp; Flow for Gasoline Engines\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAEM’s 340LPH High Flow In-Tank Fuel Pump is designed for high performance naturally aspirated and forced induction EFI vehicles. It delivers reliable performance and high volumes of fuel flow for roughly half the cost of comparable performance fuel pumps.\u003c\/p\u003e\n\u003cp\u003eThe AEM 340LPH High Flow In-Tank Fuel Pump (PN 50-1000) flows 340 lph (84 gph) at 40 PSI and is capable of supporting over 1,000 HP at 43 PSI.* Please see the flow curves and current draw vs. fuel pressure graphs on the specs tab for more information.\u003c\/p\u003e\n\u003cp\u003eThis fuel pump is designed for in-tank mounting for use with gasoline and features a compact 39mm diameter that fits most applications. It has an offset inlet design that eases installations and includes a wiring harness, pre filter, internal fuel hose and clamps, end cap and rubber buffer sleeve. Every pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003cli\u003eTested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003e39mm diameter fits most applications\u003c\/li\u003e\n\u003cli\u003eOffset inlet design eases installation\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested\u003c\/li\u003e\n\u003cli\u003eFor gasoline vehicles\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, rubber sleeve and end caps, pre filter, hose, clamps and flying lead\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":31626374905971,"sku":"aem50-1000","price":117.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/50-1000-1-web.jpg?v=1588712185"},{"product_id":"aem-400lph-high-pressure-inline-fuel-pump-m18x1-5-female-inlet-to-m12x1-5-male-outlet","title":"AEM 400LPH Metric Fittings Inline High Flow Fuel Pump","description":"\u003ch1\u003eAEM \u003cspan data-mce-fragment=\"1\"\u003e400LPH Metric Fittings Inline High Flow Fuel Pump\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePN: 50-1009\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eA high-flow metric fittings replacement fuel pump in\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ean \"044-style\" envelope\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAEM’s 400lph Metric High Flow, high pressure Inline Fuel Pump (PN 50-1009) is the perfect direct replacement upgrade for 044 pump users who want more fuel flow for their high performance vehicle!\u003c\/p\u003e\n\u003cp\u003eThe 400lph Metric High-Flow Inline Fuel Pump has an M18X1.5 female inlet and M12x1.5 male outlet. It utilizes the industry standard “044 Style” envelope. It is capable of supporting over 1,200 HP normally aspirated and a whopping 860 HP at 30 psi boost!* It flows 400lph (105 gph) at 40 PSI, 340 lph (90 gph) at 73 PSI, and 270 lph (71 gph) at 120 PSI. Complete flow curves from 35 to 120 PSI and current draw vs. fuel pressure charts are available on the Specs tab.\u003c\/p\u003e\n\u003cp\u003eThe AEM 400lph Metric High Flow Fuel Pump is rated for use with ethanol-blended fuels, (E85\/E90) and all types of gasoline, but pump life will be diminished if used with 100% ethanol fuels.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003ePopular “044 Style” physical configuration with metric fittings for direct replacement of 044 pumps!\u003c\/li\u003e\n\u003cli\u003eMaintains very high flow even at boosted fuel pressures; 340 lph @ 73 PSI (30 psi boost)\u003c\/li\u003e\n\u003cli\u003eEach pump individually tested to flow minimum of 400lph (105gph) @ 40 PSI\u003c\/li\u003e\n\u003cli\u003eCompatible with Flex Fuel (E85\/E90) and all types of gasoline (100% Alcohol fuels may diminish fuel pump life)\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump, check valve fitting, terminal nuts \u0026amp; boots, instructions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"font-size: 1.4em;\"\u003e*Power rating given using gasoline and assuming a base fuel pressure of 43 PSI, 13.5v at the pump, 6.2 lbs\/gal with a BSFC of 0.65. Boost fuel pressure is assumed to be the base pressure of 43 PSI + boost pressure. Flow capability for horsepower support is ultimately dependent on fuel hose diameter, and system electrical voltage and amperage capabilities.\u003c\/span\u003e\u003c\/p\u003e\n\u003cbr\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":31626494148723,"sku":"aem50-1009","price":199.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/50-1009-1-web_0.jpg?v=1588713733"},{"product_id":"aem-340lph-in-tank-fuel-pump-kit-ethanol-compatible","title":"AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pumps (Offset Inlet)","description":"\u003ch1\u003eAEM 340LPH E85-Compatible High Flow In-Tank Fuel Pumps (Offset Inlet)\u003c\/h1\u003e\n\u003cp\u003ePN: 50-1200\u003c\/p\u003e\n\u003cp\u003eAEM’s 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline.\u003c\/p\u003e\n\u003cp\u003eThe AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.\u003c\/p\u003e\n\u003cp\u003eThe 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter, internal fuel hose, clamps, end cap and rubber buffer sleeve. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003cli\u003eEach pump is tested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003e39mm diameter fits most applications\u003c\/li\u003e\n\u003cli\u003eIncludes pre filter, hose, clamps, flying lead, end cap and rubber buffer sleeve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":31626494574707,"sku":"aem50-1200","price":155.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/50-1200-1-web.jpg?v=1588713655"},{"product_id":"aem-340lph-65mm-fuel-pump-kit-w-mounting-hooks-ethanol-compatible","title":"AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump 65mm with Hooks Offset Inlet","description":"\u003ch1\u003e\u003cspan\u003eAEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump 65mm with Hooks Offset Inlet\u003c\/span\u003e\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePN: 50-1215\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCompact Design, Compatible with E100 \u0026amp; M100 fuels\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAEM’s 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. Its compact, short body design (65mm length) with mounting hooks also makes it ideal in universal applications that have fuel tanks with tight tolerances.\u003c\/p\u003e\n\u003cp\u003eThe AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.\u003c\/p\u003e\n\u003cp\u003eThe 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter and O-rings. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003cli\u003eEach pump is tested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003eCompact body (39mm diameter x 65mm length)\u003c\/li\u003e\n\u003cli\u003eIncludes Fuel Pump, installation instructions, wiring harness, pre filter and O-rings (use of stock isolator sleeve is recommended)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":31626494967923,"sku":"aem50-1215","price":155.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/50-1215-1-web.jpg?v=1588713557"},{"product_id":"aem-320lph-65mm-fuel-pump-kit-w-o-mounting-hooks-ethanol-compatible","title":"AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump Offset Inlet","description":"\u003ch1\u003eAEM \u003cspan data-mce-fragment=\"1\"\u003e340LPH E85-Compatible High Flow In-Tank Fuel Pump Offset Inlet\u003c\/span\u003e\n\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePN: 50-1220\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCompatible with E100 Ethanol \u0026amp; M100 Methanol fuels\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAEM’s 340LPH E85-Compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels, and are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. Its compact, short body design (65mm length) with mounting hooks also makes it ideal in universal applications that have fuel tanks with tight tolerances.\u003c\/p\u003e\n\u003cp\u003eThe AEM 340LPH E85-Compatible High Flow In-Tank Fuel Pump is designed for in-tank mounting on high performance naturally aspirated and forced induction vehicles. It features a compact 39mm diameter that fits most applications and an offset inlet design that eases installation.\u003c\/p\u003e\n\u003cp\u003eThe 340LPH E85-Compatible High Flow In-Tank fuel pump includes a wiring harness, pre filter and O-rings. Every AEM 340LPH E85-Compatible Fuel Pump is tested to flow 340 lph at 40 PSI before it is packaged for sale.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eDesigned for high output naturally aspirated and forced induction EFI vehicles\u003c\/li\u003e\n\u003cli\u003eIn tank design\u003c\/li\u003e\n\u003cli\u003eEach pump is tested to flow 340 lph @ 40 PSI\u003c\/li\u003e\n\u003cli\u003eCompact body (39mm diameter x 65mm length)\u003c\/li\u003e\n\u003cli\u003eIncludes Fuel Pump, installation instructions, wiring harness, pre filter and O-rings (use of stock isolator sleeve is recommended)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":31626495098995,"sku":"aem50-1220","price":155.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/50-1220-1-web.jpg?v=1588713323"},{"product_id":"aem-225lph-e85-compatible-high-flow-direct-fit-fuel-pump-for-polaris-rzr-turbo","title":"AEM 225LPH E85-Compatible High Flow Direct Fit Fuel Pump for Polaris RZR Turbo","description":"\u003ch1\u003eAEM 225LPH E85-Compatible High Flow Direct Fit Fuel Pump for Polaris RZR Turbo\u003c\/h1\u003e\n\u003cp\u003e\u003cspan\u003ePN: 50-1225\u003cbr data-mce-fragment=\"1\"\u003eE85 Compatible 2016-up Polaris RZR Turbo Fuel Pump - Twice the Flow, 44% More Pressure\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAEM's 245LPH E85-compatible, direct-fit In-Tank High-Flow Fuel Pump for 2016-up Polaris RZR XP Turbo UTVs (PN 50-1225) plugs into the factory wiring harness and is a direct replacement for the OE RZR XP Turbo fuel pump (fits XP Turbo Models Only, will not fit non-turbo RZRs). It is built to withstand extreme duty, delivering a 44% increase in fuel pressure over the factory fuel pump (115 PSI max pressure AEM vs 80 PSI max pressure stock), and it delivers 100% more flow at the stock 58 PSI base pressure (202lph AEM vs 100lph stock)!\u003c\/p\u003e\n\u003cp\u003eEvery AEM 50-1225 Polaris RZR XP Turbo fuel pump is individually tested to flow 245lph (65 gph) at 40 PSI and 202lph (53gph) at the RZR XP\/XP Turbo’s 58 PSI base fuel pressure, which is enough flow to support 640 HP at 58 PSI and 482 HP at 22 PSI of boost on gasoline! Flow vs. Pressure and Horsepower vs. Pressure graphs for gasoline, E85 ethanol and M100 methanol are available on the Specs Tab.\u003c\/p\u003e\n\u003cp\u003eAll AEM E85-compatible High Flow In-Tank Fuel Pumps feature robust internal construction that is designed to withstand the low lubricity characteristics of ethanol and methanol fuels. They are tested to work with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline. Every High Flow AEM RZR Fuel Pump is flow tested before it is packaged for sale. For more\u003cspan\u003e \u003c\/span\u003ehigh-flow fuel pump\u003cspan\u003e \u003c\/span\u003eoptions click here.\u003c\/p\u003e\n\u003cp\u003eDirect-Fit Polaris XP Turbo 245lph E85-Compatible High Flow In-Tank Fuel Pump Features (PN 50-1225):\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDrop in replacement for 2016-up Polaris RZR XP Turbo!\u003c\/li\u003e\n\u003cli\u003eDelivers 44% increase in fuel pressure over stock (115 PSI max pressure vs 80 PSI stock)\u003c\/li\u003e\n\u003cli\u003eProvides 100% increase in flow at 58 PSI base fuel pressure (202lph vs 100lph stock)\u003c\/li\u003e\n\u003cli\u003eSupports 482 HP at 22 PSI of boost on gasoline (313 HP @ 22 PSI on E85)\u003c\/li\u003e\n\u003cli\u003eTested and compatible with ethanol fuels up to E100, methanol fuels up to M100 and all types of gasoline\u003c\/li\u003e\n\u003cli\u003eEach AEM Polaris RZR Turbo fuel pump is tested to flow 245 lph @ 40 PSI (202lph @ 58 PSI RZR XP base pressure)\u003c\/li\u003e\n\u003cli\u003eCompact body (37mm diameter x 70.6mm length)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eKit includes fuel pump and pre-filter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e","brand":"AEM","offers":[{"title":"Default Title","offer_id":39393179304051,"sku":"aem50-1225","price":163.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/50-1225-aem-rzr-turbo-fuel-pump-side-web.jpg?v=1625780244"},{"product_id":"walbro-400lph-39-50-dc-ss-pump-kit-package","title":"WalbroIntank Fuel Pump 400LPH High Pressure - Universal","description":"\u003ch1 class=\"page-title\"\u003eWalbro\/TI Automotive Intank Fuel Pump 400LPH High Pressure - Universal\u003c\/h1\u003e\n\u003cp\u003e\u003cspan data-ui-id=\"page-title-wrapper\" class=\"base\" itemprop=\"name\"\u003ePart Number: F90000262 or TIA400-2\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan data-ui-id=\"page-title-wrapper\" class=\"base\" itemprop=\"name\"\u003eComes with install kit.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan data-ui-id=\"page-title-wrapper\" class=\"base\" itemprop=\"name\"\u003e\u003cspan\u003eType: Universal Intank Fuel Pump \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-ui-id=\"page-title-wrapper\" class=\"base\" itemprop=\"name\"\u003e\u003cspan\u003eFuel: Gas \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-ui-id=\"page-title-wrapper\" class=\"base\" itemprop=\"name\"\u003e\u003cspan\u003eHorsepower: 500HP+ \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan data-ui-id=\"page-title-wrapper\" class=\"base\" itemprop=\"name\"\u003e\u003cspan\u003eFlow Rate: 400LPH \u003c\/span\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan data-ui-id=\"page-title-wrapper\" class=\"base\" itemprop=\"name\"\u003e\u003cspan\u003eOutperforms all current market in-tank fuel pumps Designed for engines with more than 500HP Award-winning OE technology Dual channel turbine design for maximum efficiency under high pressure and high temperature applications Made in USA by TI Automotive (formerly known as  Walbro) The F90000262 requires modifications to system wiring, fuel lines and the fuel module, and should be professionally installed. The innovative design of the DCSS 39\/50 features a single impeller with two parallel rows of turbine blades. Designed for high performance engines exceeding 500hp. Designed for gasoline applications. Designed for E85 use part number TIA485 Instead The blades feed two high-pressure pumping channels, as opposed to a conventional single-stage pump that uses an impeller with a single row of blades at its outer edge. This innovative design results in improved hot fuel flow, as well as minimal noise and current use, resulting in efficiency that’s 20 percent higher than conventional pumps.\u003c\/span\u003e\u003c\/span\u003e\u003c\/p\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":39911902937203,"sku":"wal TIA400-2","price":200.36,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/products\/group-cc5ae712-5de9-4b78-b8c3-3d0408ee1cf3-420.jpg?v=1647550958"},{"product_id":"walbro-universal-450lph-in-tank-fuel-pump-f90000274","title":"Walbro Universal 450lph In-Tank Fuel Pump F90000274","description":"\u003cspan data-mce-fragment=\"1\"\u003eWalbro Universal 450lph In-Tank Fuel Pump High Pressure Version\u003c\/span\u003e","brand":"Walbro","offers":[{"title":"Default Title","offer_id":41694654529651,"sku":"F90000274","price":112.15,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0150\/2065\/4692\/files\/e42f1466a3b51b9118c81a9377500797.jpg?v=1714003069"}],"url":"https:\/\/shop.wedontlift.com\/collections\/fuel-pumps.oembed","provider":"We Don't Lift Racing","version":"1.0","type":"link"}